10 Healthy Habits To Use Ghost Immobiliser Problems > 자유게시판

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft with the Ghost Immobiliser. This system is discreet & doesn't require additional key fobs to operate.

The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to create a unique pin code sequence that can be altered up to 20 times. This will then allow the startup of your vehicle.

Simple process to change the PIN code

With the growing rate of vehicle theft, many owners are seeking to improve their security. There are a variety of security products that are available for sale that range from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. A tracking system may assist you in locating your car if it is stolen however, it won't prevent the crime. An immobiliser, on other hand is exactly what says on the tin: it disables your car's engine so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to take your vehicle.

The ghost device makes use of the buttons on your car to create a unique sequence which must be entered in order for the engine to begin. This can be done using the window, heater or indicator stalk buttons. In addition to this option, there is a mobile app which can act as an emergency PIN code override, allowing the driver to operate the car without the button sequence. This option is particularly useful when you need to surrender your car for valet parking or servicing, as the immobiliser will still be activated and not disabled.

The ghost 2 immobiliser near me is a very unique and innovative device which works in conjunction with the buttons of your car rather than as a separate unit. It's not just an effective deterrent for vehicle theft, but it can also be used on any future vehicles you own. This makes it a better investment than a conventional wheel lock.

Weatherproof, tiny device

The Autowatch ghost immobiliser is a sophisticated security system that guards your car from key cloning, hacking and ECU swapping. It's a weatherproof and small device that communicates directly with your vehicle's ECU over the CAN data bus to disable the engine. It can be installed in the vehicle without the need for additional wiring and has been extensively tested to ensure that it is compatible with all vehicles. It is also resistant against jamming devices which are a typical technique that car thieves use to get around immobilisers.

The benefit of using CAN data is that it operates in a silent manner when compared to conventional systems. It isn't detected by sophisticated RF scanning and code-grabbing techniques and cannot be recognized by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators, but instead uses buttons on your vehicle, such as the steering wheel, the centre console, or door panels, to create a unique sequences for disarming. The sequence can be extended 20 or more presses to provide additional security. The iPhone app allows only one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is encrypted.

The ghost immobiliser car prevents car thieves adding an ignition key that is not in use or replacing the ECU to bypass the immobiliser. The engine will only run only if a valid PIN has been entered. It is also possible to put it into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) so that you can hand your car over to a valet service for servicing without the need to enter a PIN.

Tested for each vehicle

The Autowatch Porsche 911 ghost installer is a world-first aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device detects signals to prevent your car from starting normally until you enter a specific code. The system can be turned on or off by using your smartphone app, without the need for extra wires.

The standard factory immobilisers function by using a transponder that is integrated into the key. It transmits a message to the ECU. If the correct code is transmitted the car will begin however, if the transponder is replaced by one from another vehicle the immobiliser will not recognise it. This enables the vehicle to be stolen and started. The Ghost immobiliser has been developed by an South African company at the forefront of vehicle security systems technology. It protects you from key cloning or hacking, and even key theft. The only way that a burglar could steal your vehicle is physically towing it away and even then they would not be capable of driving it.

Ghost uses buttons on your vehicle, such as the indicator stalk, steering wheel, and door panels, to create unique PIN codes that must be entered in order to use your car. It does this without extra hardware, such as a keyfob. It can take up 20 to 20 presses. It is also unrecognizable to diagnostic equipment and does not transmit radio frequency signals so thieves are not able to make use of sophisticated RF scanning or code grabbing techniques to discover that a security system has been installed.

Ghost is harder to remove than car alarms, which require disarming by pressing a series of buttons. This makes it a perfect supplement to a GPS tracker which helps locate your car after it has been stolen.

Emergency PIN code override

You do not have to look long on social media sites to find stories or videos of vehicles that were stolen using the most advanced technology tools. This includes key-cloning devices and hacking devices that allow the vehicle to start without the original keys.

The Ghost immobiliser helps combat this and gives you an additional layer of security to prevent your vehicle from being taken when it is targeted by thieves. It is created by creating an unique pin code push sequence from your existing buttons on the steering wheel, door panel and the centre console. The unique pin code is entered along with your original key fob in order to prevent the engine from beginning. The unique override pin is on the black card you will receive following your installation and is easy to remember as there are no LED indications.

The device is hidden inside the vehicle's wires, and does not emit radio signals, so it cannot be recognized by thieves using diagnostic software that is able to detect the type of security system you have installed. This makes it an excellent alternative to an alarm.

In contrast to other security systems that rely on a relay located in the engine bays, immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This allows them to block a vehicle completely, by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker with these systems, however this must be specified before installing the device. They also work with valet/service modes and an excellent alternative to a tracking device when you bring your vehicle to the dealer to address an electrical problem.

Service/Valet mode

In recent years there has been an increase in vehicles that are stolen without owners' keys. It's easier than ever before to steal your pride and joy thanks to the availability of key cloning tools & door lock picks. To prevent this from happening, we now offer the Autowatch ghost immobiliser near me immobiliser that prevents your car from being driven despite the fact that your keys have been cloned or your vehicle has been hijacked.

It directly communicates with your car's ECU (Engine Control Unit) via the data loop of CAN. It's completely quiet since it doesn't use radio frequency or a key fob. This means it cannot be detected by diagnostics or other car hacking devices. It also prevents you from introducing a new ECU or key to circumvent the system, since only the PIN code allows the engine to start.

The device is hidden within your car using existing buttons on the steering wheel, the centre console and door panels. Before you can start your car, you need to enter a unique and changeable PIN number that is up to 20 numbers.

This is the first aftermarket CAN-bus immobiliser that has been developed. It will stop your vehicle from being driven or started when you don't enter a PIN code first. If you're driving away with the device in motion it will display an indicator on your dashboard and flash continuously for around 300m. Entering your PIN code will deactivate the anti-hijack. Your vehicle will continue to operate normally. If you don't enter your PIN code at this point, the warning will continue to flash and will require a new PIN code every attempt to start your vehicle.